WE OFFER ALL KLUS ITEMS. CONTACT US For ITEMS NOT SHOWN. - 440-715-5539 | EMAIL US
These Cards Accepted and PROCESSED SECURELY
Possibility of mounting sealed LED strips of the 8K series
Line of light flush with the surface
in the thermal insulation layer of the building facade, using assembly adhesives
Non visible aluminum elements
The use of a dedicated mounting insert allows the installation of two LED strips in the 8K sleeve
When choosing a different length of profiles / covers than available in the standard, you should additionally choose the cutting service at KLUŚ
Application
- For installation on facades
- Illuminated rustication of the facade
- decorative lighting
Additional information
FASKO is designed mainly for Outdoor lighting fixtures, However Indoor use is fine.. The lighting fixture made of the FASCO profile is supposed to illuminate with a Narrow Line of Light.Proportionally to the entire fixture, with the smallest possible overall size, the aluminum element can hold two. LED strips 8 mm (0.31") wide. which enables the following elements of the Klus? system to be inserted into it: fasteners, ZM connectors, ZM eyes, ZM eye locks. Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.
Lead Time May Vary Based on Product Mix / Quantities Ordered
Standard Order - No Cutting
2 - 3 Days
Custom Cuts - Extrusions, Covers or LED Tape
3 - 5 Days
Custom Builds
2 - 3 Weeks
The lead times also apply to all expedited orders; however,
we will try our best to ship on the requested date.
ORDERS BELOW $200.00 are SUBJECT to a $25.00 SERVICE CHARGE
Please Provide SHIPPING ZIP CODE for Shipping Quote
CLICK IMAGE for LARGER
FASKO Extrusion
ITEM
DESCRIPTION
PRICE
A004323N_2
79.75" / 2M FASKO Non-Anodized Extrusion
$112.00
A004323N_3
118.11" / 3M FASKO Non-Anodized Extrusion
$158.00
Download for Achieving Line of Light, Full Specifications, Dimensions and Instructions
Here in the US, one of the more important features of LED lighting in direct view, is to achieve “a clean line of light” or in other words, no visible diodes from the LED tape light inside the fixture. Distilling this design constraint down to its basic components produces: Cones of Light and Covers. Expanding on these two characteristics gives us four elements of control when designing a fixture: Cover type, LED spacing, LED output, and Cover to LED spacing.